How to improve the steam quality of the Sanmenxia biomass boiler?
Writer： admin Time：2021-11-19 16:12 Browse：℃
We should all understand that the current appeal for environmental protection is getting higher and higher. This is because it is closely related to our lives. Boiler biomass burner manufacturers remind you to pay attention to environmental protection when using biomass burners!
Before using the biomass burner, clean up the residue in the combustion boiler, add new biomass pellet fuel, and then close the lid of the material tank. Before starting up and running, check all circuits and water pipes to check whether there are any abnormalities such as leakage or breakage in the circuit, check whether the water pipes are leaking, and avoid water leakage. Check whether the cooling water in the water tank is full, then open the biomass burner cooling valve, do the debugging of the air supply, start the feeding system, and gradually increase the biomass pellet fuel. The whole process lasts three to five minutes. This is to ensure that the temperature inside the biomass burner boiler gradually rises. The whole process is to ensure that the biomass burner is energy-saving and environmentally friendly. Only when the biomass burner is operated in strict accordance with the operating instructions can the biomass combustion be ensured. The machine can fully burn and play a role.
Generally speaking, the steam quality actually refers to the cleanliness of the steam. Its quality depends on the amount of impurities contained in saturated steam. If the impurity content is too high, it may cause problems such as the flow of the turbine and the deposition of salt in the steam pipe. Therefore, it is necessary to improve the steam quality. Here are several ways to improve the steam quality of biomass boilers:
1. We should ensure that the quality of the water is good and minimize the amount of impurities.
2. Drain the boiler reasonably. Continuous blowdown can reduce the salt content and silicon content of the boiler water, and regular blowdown can eliminate slag in the boiler water.
3. Avoid overloading the boiler.
4. Strictly control the normal water level of the boiler to prevent the steam from being polluted due to the high water level, resulting in a decrease in steam quality.
The above is an introduction for you on how to improve the steam quality of the Sanmenxia Biomass Boiler. If you want to know more about the biomass pellet burner, please pay attention to Zhengzhou Bona Thermal Energy Equipment Co., Ltd.!