Writer： admin Time：2020-12-16 00:00 Browse：℃
A Chinese boiler diesel burner manufacturer, selling high-quality and low-price boiler diesel burners, light oil burners, methanol burners and other burners with different fuels! The inspection before the debugging of the diesel fuel engine has three aspects: 1. Check whether the diesel is in place, whether the fuel pipeline is clean and unobstructed, and whether the valve is open. 2. Whether there is pipeline leakage and whether the pipeline installation is reasonable. 3. Whether the oil inlet and return pipeline is installed correctly, and the return pipeline is not allowed to install valves 2. Internal inspection of boiler diesel fuel engine 1. Whether the fuel nozzle of the burner is installed and whether the ignition electrode is adjusted properly. 2. Whether the direction of motor rotation is correct. 3. Whether the external circuit connection meets the requirements. 4. Perform a cold simulation of the burner according to the line conditions, and observe whether the various parts of the equipment are normal and whether the flame detection protection part is normal. 3. Debugging of diesel combustion engine 1. Check whether the external diesel oil is in place, the pipeline is unobstructed, and the external power supply control is in place. 2. Adjust the load of the burner to a small load, and adjust the ignition position to a small load accordingly. Turn off the large load to ignite and observe the flame situation, and adjust the servo motor or damper according to the flame situation.
Add: No. 33 Xinhua Road,Xinmi,Zhengzhou,China