Welcome to visit BNTET Burner website!

NEWS

Biomass gasifier burner characteristics

Writer: admin Time:2021-12-25 00:00 Browse:

When the biomass burner operation, we must ensure that there is sufficient wind and even the bottom of the material, to get to work well. So biomass gasifier burner features
	Biomass gasifier burner characteristics

Biomass gasifier burner characteristics
Biomass gasifier burner aluminum smelting process is based on the development of a new energy efficient furnace, which can satisfy the aluminum melting process: alloy composition strict requirements, discontinuous production, a single furnace larger capacity requirements, It reached reduce consumption, reduce burning, improve product quality, reduce labor intensity and improve working conditions and improve the effectiveness of the production efficiency for intermittent operations, with gold smelting and recycling charge more. Efficiency: pellet fuel from renewable raw energy, low cost, than fuel (gas) more than 30 to 60% reduction of the running cost. High thermal efficiency: Semi gasification combined cyclonic combustor Gache line design with the wind, cold staged combustion, burn rate of 98%. Stable and reliable: a slight positive pressure operation, tempering and fire off phenomenon does not occur. Low-carbon environment: smoke, low sulfur and nitrogen emissions, carbon dioxide emissions, in line with the requirements GB13271 soot emissions. Simple: air-cooled protection, simple modification, automatic feeding, simple operation. Structure and characteristics: 1, using a circular hearth furnace burner configuration and reasonable, a strong air circulation furnace, temperature uniformity, no local overheating phenomena over-burning, improve product quality and prolong the service life of the furnace. 2, a shaft furnace: flue gas waste heat absorbed fully charge within the shaft furnace, the furnace top exhaust gas temperature reduced, greatly improve the thermal efficiency, while charge into the hearth furnace preheated to near molten state, to ensure a high melting rate and very low energy consumption. 3, using the air preheater furnace shell and sandwich duct: air preheater flue gas heat well absorbed, preheated air into the furnace shell sandwich duct, heating is further preheated, ambient temperature is relatively increased, reducing furnace after cooling shell, air preheater can improve combustion efficiency, combustion intensity, the flame temperature and speed, air circulation and the strengthening furnace heating rate. 4, the sealing door reasonable structure, no need to increase stove furnace door; Yan door seal, opening less time, less heat loss in the furnace, slag-free refining dead, easy operation, good operating environment. 5, top charging: feeding convenient, low labor intensity, small fluctuations in furnace temperature, furnace length, the addition does not occupy the melting time. 6, energy-efficient use of the burner as a heat source, an ignition is easy, fast heating, high-speed jet, combustion safety, a small excess air ratio and other characteristics.