Writer： admin Time：2022-07-07 00:00 Browse：℃
Natural gas is a hydrocarbon gas admixture, hydrogen sulfide, carbon dioxide, nitrogen and other components, which is mined from the ground combustible gas. Natural gas burner can be used in heating engineering, then the gas burner features and clean way
Biogas burner features and clean way
Biogas burners more clean and hygienic. Normal atmospheric burner is insufficient, a certain amount of limited thermal efficiency of the exhaust gas flames smoked pot, atmospheric pollution (of PM2.5), so that kitchen surfaces, kitchen cleaning difficult. Red infrared stove using infrared flameless combustion technology, complete combustion, carbon emissions almost to zero free, smoke-free flame contact with the bottom of the pot. Blackened bottom of the pot does not use long, long time adhere to the kitchen environment and heating appliances are clean, the kitchen more manageable, more peace of mind, also declined significantly kitchen air PM2.5 levels, conducive to family health. Two-stage combustion gas to the burner, is automatically detected by the pressure control. (Note: There have means 3 sets German supply duct inlet pressure detector declares that a different pressure detection signal when the work, to achieve the automatic pressure detecting left unattended, automatic operation combustion). Wherein gas burner operation: automatic control gas burner, combustion automatically (automatic and manual control may end). Dual gas burner flame arrester technology selected to ensure that the combustion gas is not tempered in any case, diffuse combustion. External combustion type gas combustion flame is short, not black smoke, high combustion efficiency. Biogas combustion gas burner, without a combustion flame, smoke is 0. Gas burner made of stainless steel. Considering that outdoor work, the system of wind, rain structure. Turn off the alarm. Elegant, with plenty of combustion. Gas burner common faults and repair, flame red, yellow, light shaking may smoke, do not light blue inner flame, and even smell. Probably because primary or secondary air shortage, the nozzle hole is too small, clogging fire. Cleaning method: adjusting the amount of secondary air into the gas burner, and the burner nozzle to increase the spacing of the nozzle and the eradication of the fire hole blockage. Excessive flame, combustion dynamics too, may be due to too much air time, perhaps too much pressure gas stove. Cleaning method: air foil may be minor or stove off switch processing approach. Flame from the fire hole, hold the pot when, from the fire or flame, the fire cover outermost twice off the fire. The reason may be: the burner does not meet the requirements, a small number of fire hole, a small area of the crater holes; gas pressure, the flow rate is too fast; fire the fire cover clogging hole cut the size of the crater, the primary air ejectors not come. Clean way: choose good technical performance of the stove; stove control pressure rated pressure; clear the fire cover fire hole. Or non-uniform flame size not determined.
Add: No. 33 Xinhua Road,Xinmi,Zhengzhou,China