Welcome to visit BNTET Burner website!

NEWS

Incineration of fuel incinerator

Writer: admin Time:2022-07-07 00:00 Browse:

The frequency of oil burners used in today's industrial production is relatively high, which is why it makes oil burners subject to certain sought after, what should be noted when using the diesel burner? Learn more about incineration oil burners Safety Rules Fuel incinerator
	Incineration of fuel incinerator

Incineration of fuel incinerator
Oil system not oil spills, leaks. Recommended before burning machine, check whether the fuel tank satisfied. Specification Specification should fit the valve nozzle. When using machine incineration, incineration boilers as used in the machine commissioning inconsistent damper typically needs proper adjustment, needs sometimes replaced with a suitable nozzle angle specifications and eruptions. Ambient temperature fuel incinerator should not cross 70 ° C, or should be insulated and cooled. When used in cold areas, oil storage facilities and oil return pipe insulation system should be used in appropriate ways to prevent clogging of oil passages frozen. Thus the internal combustion engine control circuit portion from the influence of moisture or high temperature. Too many recent gas explosion and gas produced hijack all kinds of trouble to personal problems, and that on the issue, it mattered! The burning characteristics of the gas in the furnace, and its handling requires mainly with a pre-blowing, the active burning, the burning condition monitoring, biomass particles misfire maintenance, maintenance of flame, the gas pressure limit irregularities maintenance, lack of maintenance of air pressure, power failure maintenance, preventive measures such as a gas leak causing trouble. Below us together to talk about the issue of fuel burned at the incinerator: Gas burning machine should use spark burning, easy to take the initiative to end manipulation. Incineration conditions need to be dynamically monitored, once the flame detector flame sensed signal, it is necessary to reactor fuel burning machine in a very short time, then into the state of maintenance, with gas supply cut off. Flame detectors sense to be able to properly measure the flame signal, neither active, nor Rescinding the Prohibition. General requirements declaration signal from the flame to flameout of the flame detector does not cross the echo time 0.2 seconds. When burning fuel burning machine, into a gas, a gas burning fire. Incineration operation request generated before the gas passed into the first field constituting the burning temperature, burning fire convenience. Assumed misfire, flame detectors sensing flame signal can not enter the maintenance situation. Marked: generally require 2-3 seconds into a gas, a flame detector flame sensed signal discriminated, the process proceeds to maintain the unfired condition, burning fire insisted.